Meter-pîşesaziya mit-ivy Pêşkêşkera Zeliqandina Akrîlîk Latex-a Pêşkeftî ya bi hêzek berbiçav a berbiçav
Bikaranînî
Ew pêvekêşînek pir baş a bi substratên polayî û destpêkên bi vî rengî yên bingeha avê re heye, û taybetmendiyên fîzîkî û mekanîkî yên baş piştî ku pêla boyaxê ziwa dibe heye.
5. Fîlimê boyaxê piştî zuwabûnê parastina ronahî û parastina rengîn a hêja heye.
Serîlêdana pêşniyazkirî Ew ji bo parastina dravdana kamyonan, perçeyên makîneyan, alavên pîşesaziya sivik, hwd. Ku parastina mezin hewce dike, guncan e.
Daneyên teknîkî Rengê cûda
Zeviya zuwa (50% miscibility) 15 ℃ C <1h ； 25'C <0.5h
Zuha hişk (50% şilî) 15'C <48h; 25 ° C <24h
"Kg.cm" 50 lêdide
Av (50 ± 5μm) 72h fîlimê boyaxê bilûr nabe, alîkariyê nadê, ne zirav dibe.
Zehmetî 0.3 (pendola ducar) stûriya fîlima testkirina milkê mekanîkî (23 ± 3jμm)
Adhesion (Hegelian) Ast 1
Dermankirina rûyê Divê rûyê materyalê pêçayî bê şil, rûn, karbon asîd û ax be.
Kîtekîtên Bilez
Polayê bi çermê oksîdê: Teqandina teqîn an rêbazên teqîna qûmê wekî pêvajoyê heya asta Sa2.5, li cihê ku teqîna qûmê nayê kirin divê bi mekanîkî were polî kirin an
Kîmyewî hate dermankirin da ku hemî milên şikestî yên float werin rakirin.
Polayê bê çermê oksîdê: sandblasted (gulebaran kirin) li Sa2.5 an amûrên grinding elektrîkê bi hewa-aktîfkirin ji St3.
Welding, flame-birrîn an sererastkirina agirê deverên kevanê şewitandî: hûrkirin heya asta St3.
Materyalê bingehek bi fîlimê boyaxa kevn: şaxên boyaxa rengîn ên kevn û zirav, û sand bi St3 bi hewa an amûrên sandkirina elektrîkê vekin.
Paketa boyaxkirinê ya tîpîk dikare bi pirtûka bingeha avê ya H902 ve were bikar anîn, an tenê wekî topekek xemilandî ya gelemperî were bikar anîn, an jî bi celebên din ên hilberên pêşîn re were bikar anîn (pêdivî ye ku ji bo rastkirinê were hevber kirin).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
